Kheria Autocomp IPO
Auto Ancillaries • ₹46.44 Cr
High risk because:
- 5 material risk factors disclosed in DRHP
- High customer concentration flagged in the DRHP
- SME listing with thinner post-listing liquidity
IPOFins risk score from DRHP risk factors, subscription demand & issue structure
Price Band
₹101
Lot Size
1200 shares
Issue Size
₹46.44 Cr
Open
17 Sept 2026
Close
21 Sept 2026
Subscription
2.32×
IPO Schedule
| Issue Open Date | 17 Sept 2026 |
| Issue Close Date | 21 Sept 2026 |
| Allotment Date | 22 Sept 2026 |
| Listing Date | 23 Sept 2026 |
About Kheria Autocomp
Kheria Autocomp Limited, incorporated in 2009, is an auto ancillary company engaged in plastic injection moulding and sub-assembly operations, primarily supplying the automotive sector. It operates as a Tier-II supplier, manufacturing components based on specifications provided by Tier-I vendors serving passenger vehicle OEMs. Its products include interior cabin trims, exterior plastic parts, under-hood components, and HVAC ducts for both internal combustion engine and electric vehicles. The company operates a manufacturing facility at Tata Vendor Park, Sanand, Gujarat, spread across approximately 3 acres. As of FY26, the facility has 30 injection moulding machines with capacities ranging from 120 to 1,700 tonnes and an installed capacity of 5,400 MTPA. The facility also uses automation, robotic systems, and vision measuring equipment. The company is certified under IATF 16949, ISO 45001:2018 and ISO 14001:2015. Use of proceeds: This is a fresh issue of shares. Therefore, the net proceeds from the fresh issue will go to the company. They will be utilised for the following purposes: Part funding of capital expenditure for setting up a new manufacturing facility for plastic moulded auto components – Rs 39.96 crore General corporate purposes
Company Details
Founders / Promoters
Mr Vinay Kheria
Founded
2009
Registrar
KARVY
Documents
DRHP / RHP Document (PDF)
View official prospectus →
Investment Analysis
Kheria Autocomp — IPOFins Verdict
QuantitativeDriven by QIB demand at 1.1x and elevated disclosed risk (9/10), Kheria Autocomp listed at a premium of 3.9% to its issue price. SME listings are also thinner and more volatile after listing. The signals look weak — weigh the risks carefully. This is a quantitative flag, not a recommendation.
- The company claims to have over a decade of experience in plastic injection moulding for the automotive sector. It manufactures components to Tier-I customer specifications and focuses on quality, cos
- The company claims to benefit from its manufacturing facility at Tata Vendor Park, Sanand, Gujarat, which is close to major automotive manufacturing hubs, raw material suppliers, and key Tier-I custom
- The company claims to have technology-enabled manufacturing capabilities supported by automation and over 20 industrial robots. It has experience with complex moulding techniques, including core-pulli
- The company claims to have a dedicated in-house quality assurance and testing facility covering dimensional checks and batch validation at different stages of production. It can also install customise
- The company claims to source raw materials from established and approved suppliers, including customer-nominated vendors, while considering specifications such as colour, quality and grade certificati
Score breakdown — what drove this verdict
High risk from DRHP → score -1.6
Institutional subscription → score 0
Actual listing outcome → score +0.5
SME IPOs have lower liquidity after listing → score −0.5
Base score: 5.0 · Final score = base + all factor adjustments, capped 1–10. Full methodology →
IPOFins Score is a quantitative signal from subscription demand, disclosed risk, and listing data — not investment advice. Not SEBI-registered.
Listing Performance
Issue Price
₹101
Listing Price
₹104.9
Listing Gain/Loss
+3.86%
Listing Date
23 Sept 2026
Price Since Listing
Returns are measured against the ₹101 issue price.
Listing
₹104.9
+3.9%
Current
₹96.3
-4.7%
Want to buy this stock?
Trade Kheria Autocomp on the secondary market
FAQ
What is the price band of Kheria Autocomp IPO?
The price band is ₹101 per share with a lot size of 1200 shares. Minimum investment: ₹1,21,200.
What does Kheria Autocomp do?
Kheria Autocomp Limited, incorporated in 2009, is an auto ancillary company engaged in plastic injection moulding and sub-assembly operations, primarily supplying the automotive sector. It operates as a Tier-II supplier, manufacturing components based on specifications provided by Tier-I vendors serving passenger vehicle OEMs. Its products include interior cabin trims, exterior plastic parts, under-hood components, and HVAC ducts for both internal combustion engine and electric vehicles. The company operates a manufacturing facility at Tata Vendor Park, Sanand, Gujarat, spread across approximately 3 acres. As of FY26, the facility has 30 injection moulding machines with capacities ranging from 120 to 1,700 tonnes and an installed capacity of 5,400 MTPA. The facility also uses automation, robotic systems, and vision measuring equipment. The company is certified under IATF 16949, ISO 45001:2018 and ISO 14001:2015. Use of proceeds: This is a fresh issue of shares. Therefore, the net proceeds from the fresh issue will go to the company. They will be utilised for the following purposes: Part funding of capital expenditure for setting up a new manufacturing facility for plastic moulded auto components – Rs 39.96 crore General corporate purposes
Should I apply for Kheria Autocomp IPO?
Kheria Autocomp listed at ₹104.9 (+3.9% premium to the ₹101 issue price) after 2.3x subscription. IPOFins Score 3/10: Driven by QIB demand at 1.1x and elevated disclosed risk (9/10), Kheria Autocomp listed at a premium of 3.9% to its issue price. SME listings are also thinner and more volatile after listing. The signals look weak — weigh the risks carefully. This is a quantitative flag, not a recommendation.
Who founded Kheria Autocomp?
Kheria Autocomp was founded by Mr Vinay Kheria in 2009.